How to Install the WAYB Pico Car Seat in Cars and Airplanes

Melinda Beyer
5 Minute Read
How to Install the WAYB Pico Car Seat in Cars and Airplanes

Traveling with kids is complicated — installing your car seat shouldn’t be. The WAYB Pico is designed to be easy, compact, and safe whether you’re flying, road tripping, or just hopping in grandma’s car for the weekend. Here’s your step-by-step guide for installing the Pico in all the places you might need it.


✈️ On an Airplane

Flying with kids can feel overwhelming, but the Pico is FAA-approved and perfect for plane travel.

How to install on a plane:

  • Place the Pico in the airplane seat.
  • Thread the lap belt through the guides on the seat base.
  • Buckle and pull tight until there’s no slack.
  • Check that the seat doesn’t move more than 1 inch side-to-side.

Pro tip: Install the Pico in a window seat so it won’t block other passengers from getting in and out.


🚕 In a Taxi or Rideshare (Uber/Lyft)

The Pico’s quick setup makes it rideshare-friendly — perfect for city families or travelers on the go.

How to install in a rideshare:

  • Have your Pico ready to go (it folds and carries like a backpack!).
  • Use the vehicle’s lap/shoulder belt and thread it through the guides.
  • Buckle and pull tight.
  • Double-check that it’s secure before your ride takes off.

🚗 In a Rental Car

Whether you’re road-tripping or just need a car for the weekend, installing the Pico is fast and easy.

Two installation options:

  • With a lap/shoulder belt: Thread, buckle, and tighten — just like a rideshare.
  • With LATCH: If the car has lower anchors, connect the Pico’s LATCH straps to the anchors and pull to tighten.

Pro tip: Practice at home before your trip so you can install confidently in minutes.


🏡 In a Friend’s or Grandparent’s Car

No more lugging a bulky car seat across town.

How to install:

  • Install with either LATCH or the lap/shoulder belt (whichever the car has).
  • Adjust the harness so it fits your child snugly.
  • Give the seat a good wiggle — if it moves less than 1 inch, you’re good to go.

🚍 On a Bus or Shuttle

If the bus or shuttle has lap/shoulder belts, you can safely install your Pico. If there are no belts, the Pico cannot be used — your child will need to sit in the vehicle seat.


🛻 In a Truck

Yes, the Pico works in trucks too!

  • Install using the lap/shoulder belt or LATCH anchors (if available).
  • Make sure the truck seat is in the upright position — no reclining.

Final Tips for Safe Installation

  • Always check your Pico’s manual before installing — it has diagrams to guide you.
  • Watch WAYB’s installation videos here.
  • If you’re unsure, schedule a virtual check with a CPST (Child Passenger Safety Technician) — they can walk you through it.